About Us     |     Blower Line     |     Prime Turbines     |     Turbine Generator Sets     |     Skinner Power Systems     |     Contact Us

Pneumatic Blower Technical Data     |     PA-20 and 24 Instruction Manual (pdf, 530 kB)

PA-16 Instruction Manual (pdf, 580 kB)

 
 
Prime-Air 20 and 24

To provide efficient and high volume air moving capacity, Prime-Air Blowers has created the Prime-Air 24 - the largest pneumatic fan we have created thus far. When operated, compressed air is pushed through a nozzle at the tip of each fan blade, which propels the fan at high speeds creating up to 16,900 CFM. The Prime-Air 24 is precisely designed to fit 24” API tank openings. Like our other pneumatic fans, the Prime-Air 24 can be used as a blower or exhauster, by simply reverse mounting.

Prime-Air 20’s rugged aluminum fan housing and reaction fan is designed to produce 11,000 CFM at 100 psig (max) inlet pressure quickly and efficiently. Weighing only 75 lbs., this blower is easily transported from one place to another by using its recessed carry handles, or it may be rolled. The unit’s flange is designed to fit standard API tank openings. The Prime-Air 20 can be used as a blower or exhauster, simply by reverse mounting.

Features

  • Spark-resistant, heavy duty aluminum fan and fan housing

  • OSHA standard safety screens

  • Heavy duty ball bearings are permanently lubricated and sealed for the life of the product

  • Stainless steel (300 Series) fan shaft eliminates internal rust

  • Newly designed 3/4” side mount inlet connector


 

Prime-Air 16

The Prime-Air 16 is the newest in our line of pneumatic blowers. The unit is rugged, lightweight, and operates quickly and efficiently on compressed air, producing 5,150 CFM at 0" static pressure with 80 PSIG inlet pressure.  Its cast-in handle and feet allow for maximum portability.

Features

  • Spark resistant cast aluminum heavy duty fan housing

  • Heavy duty ball bearings are permanently lubricated and sealed for life

  • Stainless steel (300 Series) fan shaft eliminates internal rust problems

  • Safety screens which meet OSHA standards

 

 

Prime-Air 12

The Prime-Air 12 Pneumatic fan is designed specifically for Marine applications. The cast aluminum main housing is flanged for tie-down on standard Butterworth hatches.

The Prime-Air 12 features matching heavy duty inlet and exhaust flanges allowing the unit to be reversed for either ventilating or exhausting applications.  The unit is rugged, lightweight, and operates quickly and efficiently on compressed air, producing 4,000 CFM at 0 static pressure with 80 PSIG inlet pressure.

Features

  • Spark resistant cast aluminum heavy duty fan housing

  • Heavy duty ball bearings are permanently lubricated and sealed for life

  • Stainless steel (300 Series) fan shaft eliminates internal rust problems

  • Safety screens which meet OSHA standards

  • Newly designed 3/4” side mount inlet connector

 

 
   

 

Questions or comments about our page? Please contact us: website@primeairblowers.com

Copyright 2010 Prime-Air Blowers, Inc.